WHAT MAKES MIZU FOAM THE BEST WAY TO CLEAN A/C COILS?
There is a variety of ways to clean A/C coils. Frequently, high-pressure cold water has been a popular method to push the dirt out of the coils. Having the correct pressure is critical as it is easy to permanently damage the coils fragile fins by bending them. Steam or heat is not advised as they can cause high pressure within the coils and will damage them. Vacuums and coil cleaners can effectively remove debris but are relatively expensive. Mould inhibitors can be used to remove and prevent the growth of mildew and bacteria.
The safe to use, affordable and environmentally friendly choice is Mizu Foam. Mizu Foam unblocks drainpipes and removes dirt dander, and allergens without harming the coils and fins. Mizu foam will eliminate bacteria and potentially harmful mould spores. Allergies can be prevented, because the A/C unit will filter the air and not harbour dirt, dust, and grime. Mizu Foam is safe to use anywhere, even in nurseries and hospitals, because it is made from nonhazardous and environmentally friendly material.
How is Mizu Foam Applied?
It’s easy to clean air conditioner coils with Mizu Foam:
Step 1. Switch off the breaker connecting the air condition and remove the front cover. Cover the floor with paper or plastic and prevent any dripping foam stains.
Step 2. Pull out filter.
Step 3. With a spray bottle, wet coils thoroughly to remove dust.
Step 4. Shake Mizu Foam from side to side for 20 seconds and spray over coils. Do not spray on electronic components.
Step 5. Let stand for 15 minutes to allow Mizu Foam to seep into the coils recess and clean all stains.
Step 6. Spray coils again with water to remove left over residue.
Step 7. Replace filter and front cover. Let air conditioners dry for one hour before running air conditioner again.
Step 8. Enjoy cleaner air, a fresh sent, and a more efficient air conditioner!